diff --git a/tools/linux/juniper-ctrl/juniper-net-manager/README.md b/tools/linux/juniper-ctrl/juniper-net-manager/README.md
new file mode 100644
index 0000000..7f3f957
--- /dev/null
+++ b/tools/linux/juniper-ctrl/juniper-net-manager/README.md
@@ -0,0 +1,41 @@
+# 🛠 Juniper Network Toggle Too
+
+This script automates the activate / deactivate operations on Juniper JunOS devices via SSH. It intelligently distinguishes between interface addresses and static routes.
+
+---
+
+### 🚀 Key Features
+* **Dual Mode:** Detects if the target is an interface (`address`) or a static route (`route`).
+* **Dynamic CIDR:** Supports masks from `/24` up to `/32`.
+* **Safety First:** Runs in Bash Strict Mode (`set -uo pipefail`).
+* **Dry Run Ready:** Includes a debug echo of the command before execution.
+
+### ⚙️ Prerequisites
+* **Packages:** `ipcalc`, `openssh-client`.
+* **Access:** Passwordless SSH access to the Juniper host.
+* **Config:** A `juniper-net-manager.conf` file defining `JUNIPER_USER`.
+
+### 🏃 Quick Start
+```bash
+    # Deactivate a network (Interface)
+    ./juniper-net-toggle.sh 10.10.1.1 192.168.50.0/30 OFF
+
+    # Activate a static route
+    ./juniper-net-toggle.sh core-router-01 185.65.200.0/24 ON
+```
+
+### 🔧 Parameters
+| Argument | Description |
+| :--- | :--- |
+| `HOSTNAME` | Target Juniper IP or FQDN. |
+| `NETWORK` |	Network with CIDR (e.g., 1.1.1.0/24). |
+| `ACTION` |	ON (activate) or OFF (deactivate). |
+
+### ⚠️ Troubleshooting
+* **Error: Not found:** Ensure the IP and Mask match the Juniper configuration exactly as seen in show configuration.
+* **Unbound variable:** Ensure all 3 arguments are provided.
+
+---
+
+### ⚖️ License
+MIT [LICENSE](https://github.com/andsyrovatko/s4k-admin-toolbox/blob/main/LICENSE). Free to use and modify.
diff --git a/tools/linux/juniper-ctrl/juniper-net-manager/juniper-net-toggle.conf.example b/tools/linux/juniper-ctrl/juniper-net-manager/juniper-net-toggle.conf.example
new file mode 100644
index 0000000..0b34d8b
--- /dev/null
+++ b/tools/linux/juniper-ctrl/juniper-net-manager/juniper-net-toggle.conf.example
@@ -0,0 +1,4 @@
+# ip_manager.conf - Configuration for IPSET Management Script
+
+# --- CREDENTIALS ---
+JUNIPER_USER="your_ssh_user_here"
\ No newline at end of file
diff --git a/tools/linux/juniper-ctrl/juniper-net-manager/juniper-net-toggle.sh b/tools/linux/juniper-ctrl/juniper-net-manager/juniper-net-toggle.sh
new file mode 100755
index 0000000..6058137
--- /dev/null
+++ b/tools/linux/juniper-ctrl/juniper-net-manager/juniper-net-toggle.sh
@@ -0,0 +1,116 @@
+#!/usr/bin/env bash
+# =============================================================================
+# Script Name : juniper-net-toggle.sh
+# Description : Activate/Deactivate Juniper network interfaces or static routes via SSH.
+# Usage:      : ./juniper-net-toggle.sh <HOSTNAME/HOST-IP> <NETWORK/CIDR> <ACTIONS>
+#               For details - see README.md
+# Author      : syr4ok (Andrii Syrovatko)
+# Version     : 1.0.0b
+# =============================================================================
+
+# --- STRICT MODE ---
+set -uo pipefail
+IFS=$'\n\t'
+if [[ $# -lt 3 ]]; then
+	{
+		echo "[ERROR]: Not enough arguments!"
+    	echo "Usage: $0 <HOSTNAME/HOST-IP> <NETWORK/CIDR> <ACTIONS>"
+    	echo "Actions: OFF (deactivate), ON (activate)"
+	}
+    exit 1
+fi
+
+# Configuration Loader
+CONFIG_FILE="$(dirname "$0")/juniper-net-toggle.conf"
+
+if [[ -f "$CONFIG_FILE" ]]; then
+    # shellcheck source=/dev/null
+    source "$CONFIG_FILE"
+else
+    echo "[Error]: Configuration file not found. Create ip_manager.conf from example."
+    exit 1
+fi
+
+# Received variables
+JUNIPER_HOST="$1"
+NET_TO_DISABLE="$2"
+ACT="$3"
+
+# Environment & Tools
+SSH_BIN=$(which ssh 2>/dev/null || true)
+IPCALC_BIN=$(command -v ipcalc)
+
+if [[ -z "$IPCALC_BIN" ]]; then
+    echo "[Error]: 'ipcalc' is not installed. Run: sudo apt install ipcalc"
+    exit 1
+fi
+
+# Logic for Dynamic Masks
+# Extract CIDR mask (e.g., from 192.168.1.0/24 it gets 24)
+MASK=$(echo "$NET_TO_DISABLE" | cut -d'/' -f2)
+# If no mask provided, default to 32
+if [[ "$NET_TO_DISABLE" == "$MASK" ]]; then
+    MASK=32
+fi
+
+# Clear network for static routes
+NET_ONLY=$(echo "$NET_TO_DISABLE" | cut -d'/' -f1)
+
+# Get the network/gateway address
+# For /32 it's just the IP, for others it's the HostMin
+if [[ "$MASK" -eq 32 ]]; then
+    net_to_gw_cvrt=$(echo "$NET_TO_DISABLE" | cut -d'/' -f1)
+else
+    net_to_gw_cvrt=$($IPCALC_BIN -b "$NET_TO_DISABLE" | grep HostMin | awk '{print $NF}')
+fi
+
+echo "[INFO]: Searching for $NET_ONLY (interface or route) on ${JUNIPER_HOST}..."
+
+# Get config line via SSH
+config_line=$($SSH_BIN -o ConnectTimeout=5 ${JUNIPER_USER}@${JUNIPER_HOST} "show configuration | display set | match \"address ${net_to_gw_cvrt}/${MASK}\"" | head -n1)
+if [ -z "$config_line" ]; then
+	# If static route
+    config_line=$($SSH_BIN -o ConnectTimeout=5 "${JUNIPER_USER}@${JUNIPER_HOST}" \
+    "show configuration | display set | match \"route $NET_ONLY/${MASK}\"" | head -n1)
+fi
+
+if [ -z "$config_line" ]; then
+    echo "[Error]: Address for network ${NET_TO_DISABLE} not found on Juniper."
+    exit 1
+fi
+
+# Prepare commands
+deactivate_cmd="${config_line/set/deactivate}"
+activate_cmd="${config_line/set/activate}"
+
+case "${ACT^^}" in # Convert to uppercase for robustness
+    "DELETE"|"REJECT"|"RESTRICT"|"OFF")
+        echo "[INFO]: Deactivating network (${NET_TO_DISABLE})..."
+        COMMAND="$deactivate_cmd"
+        MSG="Address ${NET_TO_DISABLE} deactivated!"
+        ;;
+    "NEW"|"RESUME"|"ON")
+        echo "[INFO]: Activating network (${NET_TO_DISABLE})..."
+        COMMAND="$activate_cmd"
+        MSG="Address ${NET_TO_DISABLE} activated!"
+        ;;
+    *)
+        echo "[!] Unsupported or unknown ACT value (${ACT})"
+        exit 1
+        ;;
+esac
+
+echo "$COMMAND" # DEBUG
+
+# Execute on Juniper
+ ssh -tt ${JUNIPER_USER}@${JUNIPER_HOST} << EOF
+configure
+$COMMAND
+commit
+exit
+exit
+EOF
+
+echo "[SUCCESS] $MSG"
+
+exit 0